Automatic 4 Cavity PET Bottle Blow Molding System 500ml mould
|Project name||Full automatic PET bottle blow molding machine|
|Bottle type||100ml - 2000ml bottle|
|Capacity||4000 pcs per hour|
|Bottle type||Will be designed basing on the requirement|
|Auxiliary machines||Full set|
Blow molding machine is suitable for producing PET plastic
containers and bottles in all shapes. It is widely used to produce
the carbonated bottle, mineral water, pesticide bottle oil bottle
cosmetics, wide-mouth bottle and hot fill bottle etc.
|Bottle mould||100ml - 2000ml|
|High pressure air compressor||2.5m3/30mpa|
|Low pressure air compressor||1.6m3/30mpa|
|Air storage tank||0.6m3/30mpa|
|High pressure connection pipes||2.0m3/30mpa|
1). Preform self-rotation and infrared pre-heater revolution assure
the even distribution of heat, which improve the bottle shaping
rate, increase the production.
2). High safeties with security automatic-locking device in each
mechanical action, which will make the production into a perfect
safe environment, in case of the breakdown in certain procedure.
3). Introduce the FESTO air cylinder to avoid contamination and
4). Satisfaction with different atmospheric pressure for blowing
and mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
5). Low cost,high efficiency,easy operation and maintenance etc,
profited from the fully automatic technological process.
6). Ideal cooling system make the finished bottles without any
7). Easy for you to install,test and start up.
8). Low rejection rate: less than 0.2 percent.
|Infrared thermometer||America raytek|
|Note||All of the electrical components adopts CE,UL,CCC approved
international advanced high-tech product.|
More photos for ref